Top 10 Wanhou Duplicator I3 Heating Block

0
726 reviews analysed

1. Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Feature

Description

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

2. QWORK 2 PCS MK10 Aluminum Heater Block for 3D Printer Wanhao Duplicator i3

QWORK 2 PCS MK10 Aluminum Heater Block for 3D Printer Wanhao Duplicator i3

Feature

Description

Feature:

Made of high quality aluminum, it ensures concentricity and roundness.

Aluminum Heater Block for Extruders in3D-Printers.

Specification:

Material: aluminum

Inner Screw: M7 and M3

Package:

2 x Heater Block

3. FYSETC 3D Printing Parts MK10 Silicone Cover Heater Block Silicone Socks Temperature Extremely Stable for Wanhao i3 Makerbot MK10 Style Extruders – 3 Pack Black+Blue

FYSETC 3D Printing Parts MK10 Silicone Cover Heater Block Silicone Socks Temperature Extremely Stable for Wanhao i3 Makerbot MK10 Style Extruders - 3 Pack Black+Blue

Feature

Description

Size:MK10 | Color:Black | Number of Items:3

Feature:
Size: 22 x 22 x 16 mm/ 0.8 x 0.8 x 0.6 inch

Package includes:
3 x Black MK10 Silicone Sock
1 x Blue MK10 Silicone Sock

Please Note: not includes Heater Block

4. Kweiny MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

Kweiny MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

Feature

Description

Size:Hotend Kit

Specification of nozzle:
Compatibility:MK10 hotend M7 thread aluminum heater block;
Output diameter:0.4mm;
Input diameter:1.75mm;
Size:M7;
Material:Brass.

Specification of throat:
Compatibility:MK10 hotend M7 thread aluminum heater block, MK10 aluminum cooling block;
Filament diameter:1.75mm;
Size:lower thread M7, upper diameter φ7.8mm;
Length:26mm;
Material:Stainless steel with 2mmX4mm PTFE tube.

Specification of aluminum heater block:
Compatibility:MK10 M7 nozzle, MK10 M7 throat, φ6mm cartridge heater, M3 or M4 thermocouples;
Shape size:20mm*20mm*13mm;
Material:Aluminium alloy.

Package include:
Brass nozzle:1 piece;
Stainless steel throat:1 piece;
34mm PTFE tube:1 piece;
Aluminum heater block:1 piece.

5. 12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend

12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend

Feature

Description

Size:1/4in(6.35mm) x 1in(20mm) | Style:12 Volt

12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater
Fits Many MonoPrice/Flashforge/Wanahoo MK10 3D Printers with a 1/4in 6.35mm Bore Heater Hole

Please NOTE: This is a variation listing – You must select your voltage (12v or 24v) from the drop down menu at the top of the page

Specifications:
Product: Single-head heating tube
Diameter: 1/4 inch / 6.35mm
Length: 20mm
Wire Length: 3ft 3in / 1m
Voltage: 12 Volt
Power: 40 Watt

Package Contents:
1pc – 40W 12V Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter

6. DAOKI 21PCS Heater Cartridge 24V 40W with NTC Thermistor 100K 3950,Temperature Heat Resistant Tape for 3D Printer with Thermistor Cartridge, Heat Resistant Tape, Heating Block Cotton

DAOKI 21PCS Heater Cartridge 24V 40W with NTC Thermistor 100K 3950,Temperature Heat Resistant Tape for 3D Printer with Thermistor Cartridge, Heat Resistant Tape, Heating Block Cotton

Feature

Description

Specification:
Heater Cartridge:
Material: stainless steel
Core: Nickel-chromium alloy
Voltage: 24V
Power: 40W
Diameter: 6mm / 0.24″
Length: 20mm / 0.79″
Wire Length: 1m / 39.3″

Thermistor Cartridge:
Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring length: 1m / 39.3″
Operating temperature range: -40 ° C + 300 ° C
Rated power: 45MW

Temperature Heat Resistant Tape:
Substrate material: Polyimide polymers film
Glue Type: Silicone
Substrate material thickness: 0.025mm
Thickness with adhesive: 0.05mm
Adhesive strength: 4.5N/25MM
Tensile Strength: 115N/25mm
Elongation: 50 %
Temperature Range:-73°C – 260°C

Package Included:
5 x Heater Cartridge
5 x Thermistor Cartridge
1 x Temperature Heat Resistant Tape
10 x Heating block cotton

7. Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

Feature

Description

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

Specification of nozzle:
Compatibility:MK10 hotend M7 thread aluminum heater block;
Output diameter:0.4mm;
Input diameter:1.75mm;
Size:M7;
Material:Brass.

Specification of throat:
Compatibility:MK10 hotend M7 thread aluminum heater block, MK10 aluminum cooling block;
Filament diameter:1.75mm;
Size:lower thread M7, upper diameter φ7.8mm;
Length:26mm;
Material:Stainless steel with 2mmX4mm PTFE tube.

Specification of aluminum heater block:
Compatibility:MK10 M7 nozzle, MK10 M7 throat, φ6mm cartridge heater, M3 or M4 thermocouples;
Shape size:20mm*20mm*13mm;
Material:Aluminium alloy.

Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures.

8. Zamtac 1 pcs Wanhao Duplicator i3 Plus Cartridge Heater Tube Heater Cartridge Style Heater Tube for Wanhao Duplicator

Zamtac 1 pcs Wanhao Duplicator i3 Plus Cartridge Heater Tube Heater Cartridge Style Heater Tube for Wanhao Duplicator

Feature

Description

This is the heating tube to Duplicator i3 Plus.
.
Item specifics:
Model number: Wanhao Duplicator i3 Plus
Item type: Cartridge Heater
Ships from: China

9. Zamtac Wanhao Duplicator i3 Plus Cartridge Heater Tube wahao Heater Cartridge Style Heater Tube for Wanhao Duplicator

Zamtac Wanhao Duplicator i3 Plus Cartridge Heater Tube wahao Heater Cartridge Style Heater Tube for Wanhao Duplicator

Feature

Description

This is the heating tube to Duplicator i3 Plus.
.
Item specifics:
Model number: Duplicator i3 Plus
Item type: Cartridge Heater
Name: Wanhao
Version: Duplicator i3 Plus
Power: 24V 40W

10. DIY MK10 Extruder Hot End Kit for 1.75mm Filament CTC Wanhao FlashForge Creator

DIY MK10 Extruder Hot End Kit for 1.75mm Filament CTC Wanhao FlashForge Creator

Feature

Description

DIY MK10 Extruder Hotend Packing list: 1 x MK10 Brass Nozzle 0.4mm 1 x 35mm 2*4mm PTFE 1 x MK10 Heater Block 1 x MK10 Throat/Heatbreak

Conclusion

By our suggestions above, we hope that you can found Wanhou Duplicator I3 Heating Block for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general