Nowadays, there are so many products of refrigerator tap conversion kit in the market and you are wondering to choose a best one.You have searched for refrigerator tap conversion kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator tap conversion kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
868 reviews analysed
1. Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank
Feature
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. . These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
Description
With Kegco’s Standard Dual Keg Kegerator Conversion Kit, do-it-yourself beer lovers will have all of the tools they need to convert a refrigerator or freezer into a two product draft beer dispenser that has all of the exciting features that professionals love. Included in this kit are high quality and high performance parts like a commercial-grade dual gauge regulator that allows you to monitor both the CO2 pressure in your keg and the CO2 volume in your tank, and lever handle keg couplers that are more durable and long-lasting than wing handle couplers. Once the conversion process is complete, your new kegerator will be able to run 2 full-size kegs, 2 pony kegs, 2 five gallon kegs, or any combination you choose, depending on the capacity of the refrigerator or freezer that you have converted.
2. Bev Rite CRCK101 Premium Refrigerator Conversion Kit Door Mount Keg Tap Beer Single Line, without CO2 Tank Clear
Description
Premium refrigerator conversion kit door Mount keg tap beer single line, without CO2 tank. Everything is included right down to the last hose clamp.
3. Kegco Standard Tower Kegerator Conversion Kit with 5 lb. Co2 Tank – STCK-5T
Feature
- Single Faucet 3″ Diameter Polished Stainless Steel Draft Tower
- Commercial Double Gauge Co2 Regulator & New Aluminum 5lb Co2 Tank
- American “D” System Sankey Lever Handle Tap Coupler
- 5 Feet of 3/16″ ID Beer Line Assembly
- Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits.
Description
This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.
4. Kegco 2 Faucet Premium Door Mount Kegerator Kit Without Tank 2PSCK-NT
Feature
- 100% STAINLESS STEEL CONTACT: All the metal components that your beer will come in contact with are high quality stainless steel from the keg to your glass. This ensures higher levels of sanitation as stainless steel will not pit or harbor bacteria like brass. Along with the food grade thermoplastic vinyl beer lines, these components ensure that your beer does not pick up any off flavors and tastes the way the brewery intended.
- PERLICK PERL BEER FAUCET: This Perlick beer faucet has a revolutionary ball and floating front seal design that prevents beer from being exposed to air, keeping your handle lever from sticking and mold or bacteria from building up in the faucet body. The heavy-duty 304 stainless steel construction will not pint, tarnish, or taint the flavor of your beer, and it’s polished interior ensures a smoother flow with less agitation and foaming. It is even suitable for wine, kombucha, and coffee!
- DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762-2 Commercial Grade Dual Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. Includes a y splitter and two independent shut-off valves for dispensing up to two kegs at the same keg pressure.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our popular 10″ wide door mounted drip tray’s clean design and reliable stainless steel construction make it easy to enjoy delicious draft beer every day – mess-free! Installation is simple, thanks to the two conveniently placed screw holes on the backsplash. When it’s time to clean, the top vent can be removed for easy access. Because this drip tray does not have a drain, you will need to empty it manually.
Description
If you want to ensure your beer tastes the way the brewery intended, there isn’t a better choice than the Kegco premium two faucet door mount kegerator conversion Kit! from the coupler probe to the shank to the faucet, your beer only touches 100 percent stainless steel metal components and food grade thermoplastic vinyl beer lines that will not give off any plastic taste. In addition, the Per lick perl faucet features an innovative design that will not stick, even when dispensing heavier beers. Included in the Kit are a two product, double gauge regulator for dispensing two beers at the same pressure and a wall mount stainless steel drip tray that can easily be removed for cleaning. If you’d like more information on the benefits of this Kit, feel free to give us a call at 1-800-710-9939 and one of our draft beer experts can further Explain the advantage of buying a premium Kit.
5. Kegco Basic Kegerator Draft Beer Conversion Kit – BCK-NT
Feature
- CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and a highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This faucet comes complete with a durable ABS plastic faucet knob with a sleek and glossy black finish.
- 4-1/8″ LONG SHANK WITH NIPPLE ASSEMBLY: The 4-1/8″ long forged brass beer shank features a black flange on the front and a compression ring on the back, making it easy to secure the shank to a mounting surface to attach beer line to your faucet. The shank comes fitted with a tail piece for connecting to 3/16″ I.D. beer line.
- 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE: This brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16″ I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.
- 5 FEET OF CLEAR BEER LINE WITH HEXNUT ASSEMBLY: This clear 5/16″ I.D. thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. Included is 1 plastic snap clamp with a reusable design and a coupling assembly of 1 stepless clamp, 1 3/16″ hose nipple/tail piece, and hex nut coupling nut.
- INCLUDES METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
6. 3 Faucet Refrigerator Keg Kit Commerical Tap, Taprite Regulator, by Kegconnection
Feature
- 3- 4 1/8″ Metal Shanks with Chrome Faucets and Faucet handles.
- Double Gauge Regulator, Made in the USA by TAPRITE (BONUS: Kegconnection adds an Additional ONE year warranty to Taprite regulators.)
- 3 Way Air Distributor with independent check valved shutoffs.
- 3 American “D” Keg Couplers with a Deluxe Faucet Wrench
- Shipping rate is for the Continental US ONLY
Description
Kegconnection offers this Refrigerator Conversion Kit, 3 taps for three Sanke tap kegs(Standard Commercial Beer Tap). Fully Assembled! Made in the USA Regulator(BONUS: Kegconnection adds an Additional ONE year warranty to Taprite regulators.)p is attached to an air manifold with Check Valves.(This is important because it keeps beer from flowing between kegs, this is an issue with kits built with TEE system) The manifold system will allow you to install and run your gas inside or outside of your fridge. When installing outside you will only need to drill one hole! This kit is designed to give you everything you need to dispense commercial beer from a Sanke tap (95% of beers on the market use this tap) except for the refrigerator. Very simple to set up, the hoses and pieces are already assembled!!! The Kit Includes: 2 gauge CO2 American made Taprite Regulator with 3 way air manifold, 3 American “D” Beer Taps,3-4 1/8″ standard Shanks for Refrigerator with line attached, 3-standard chrome metal faucets that screw directly into Shanks, faucet handles and stainless oetiker clamps. Also includes a Deluxe faucet wrench. Our kits come fully assembled! Shipping rate is for the Continental US ONLY
7. 2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
Feature
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
Description
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge：
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
8. R12 to R134A Conversion Kit BPV-31 Bullet Piercing Tap Valve R134A Refrigerant Opening Valve 8401 Can Tap 6015 6014 Refrigerant Vacuum Pump Adapter, Retrofit Valve Convert Adapter for A/C Refrigerant
Feature
- Package includes: you will receive 1 piece of low side port and 1 piece high side port (with dust caps), 1 piece R134a refrigerant opening valve, 1 piece 6014 refrigerant vacuum pump adapter and 1 piece 6015 refrigerant tank vacuum pump adapter and 2 pieces BPV-31 bullet piercing tap valves, totally 7 pieces, can meet your needs
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
- Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Easy installation: only a hex key wrench (included)
- Its compact design only requires a 2 inch clearance area for installation and use
- R134a refrigerant opening valve: opener connecting thread 1/2 inch ACME, interface thread 1/2 inch ACME
- Connects R-134a cans with 1/2-inch ACME threads to auto R-134a service hoses with 1/2 inch ACME connections
- T handle for easy fingertip control
- Pump adapter: useful tank pump adapter and vacuum pump adapter for charging and service tools, such as vacuum pump, can tap or oil injector to adapt between R12, R22 system and R134a systems, quick and easy connection and disconnection
- R12 R22 to R134a conversion adapter: these low/ high side retrofits converts 1/4 inch SAE R12 R22 charging port and make it accept the R134a quick disconnect hose
- Fits vehicles 1976 – 1995, excluding some GM cars 91 and up
- Easy to install: connected to the thread for use with the valve, 1 gas valve inside, fitted with a plastic protective cover
Description
Features:
BPV-31 bullet piercing tap valve:
Replaces: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
R12 R22 to R134a conversion adapter:
Function: converts 1/4 inch SAE R12 R22 charging port to R134a quick disconnect hose.
Application: fits vehicles 1976 – 1995, excluding some GM cars 91 and up.
R134a refrigerant opening valve:
1/2 Inch ACME threads connector is 7/16-20, opener screw is 1/2-16.
“T” handle for easy fingertip control, easy to install.
Specifications:
Quantity: 7 pieces
Color: as pictures shown
Material: stainless steel, plastic
Size:
Adapter 1: female 1/4 inch SAE (7/16 inch – 20 UNF) x 13 mm low side
Adapter 2: female 1/4 inch SAE (7/16 inch – 20 UNF) x 16 mm high side
6014 Vacuum pump adapter: 1/4 male flare x 1/2 female ACME
6015 Vacuum pump adapter: 1/2 male ACME x 1/4 female
Package includes:
1 x Low side port
1 x High side port
1 x R134a refrigerant opening valve
1 x 6014 Refrigerant vacuum pump adapter
1 x 6015 Refrigerant tank vacuum pump adapter
2 x BPV-31 bullet piercing tap
Note:
The mention of any brands and any related model designation above is only for purposes of demonstrating compatibility, not for trademark using.
9. NutriChef PKBRTP110 Mini Keg Beer Growler-Detachable Aluminum Regulator & Spout Easy Storage Under Pressure, Black Matte Powder Coated 128oz Press, Medium
Feature
- 3 MONTH STORAGE: A traditional growler will let carbonated beer go flat after the first pour but not this mini growler, as it will keep beer vacuum pressured and fresh for up to 3 months. Perfect for any homebrew or craft draft/draught beer
- DETACHABLE REGULATOR AND SPOUT UNDER PRESSURE: The new spear cap design can allow you to detach both the regulator and the spout while keeping the keg contents under pressure for storage. Storage dimensions (L x W x H): 5.3″ x 5.3″ x 14.25″
- NO SCRATCH POWDER COATED STAINLESS STEEL: NutriChef growler keg 128oz kit has food-grade 304 stainless steel keg & cap spear, aluminum regulator & brass tap. Stylish black matte powder coating & includes silicone O-ring kit & 47.24″ tubing
- ADJUSTABLE PRESSURE REGULATOR: Adjust the beer carbonator mini keg growler’s current PSI from the regulator gauge and fine-tune pressure by rotating the knob to enjoy a perfect head on every beer. 30 PSI, safety pressure regulated
- WORKS W/ DISPOSABLE THREADED CO2: Not included – Each 16g cartridge will pump around 128oz of beer before depleting Co2 cartridge. Screw universal threaded CO2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system
Description
Features: Compact & portable mini keg system dimple new shape kegs homebrew CO2 system keeps carbonated beverages fresh all day Includes all necessary installation components & hardware Solid stainless steel with hexagonal screw cap construction keep beverage colder, longer premium powder coating perfectly fit into refrigerator easy to assemble – easy to fill – Easy to clean
10. PERA Draft Beer keg Faucet with Flow Controller Chrome Plating Shank Tap Kit
Description
Supporting the use of the refrigerator, the refrigerator cooling, mixing valve valve opens. Open the pressure gauge carbon dioxide, carbon dioxide is pressed into the barrels of beer from the tap wine released. Product design skills, furnishings generous, civilized health, ease of use, ready to drink. Bars, hotels, restaurants, living rooms and other supplies required to drink a beer ideal.
Conclusion
By our suggestions above, we hope that you can found Refrigerator Tap Conversion Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
